Bar Height Folding Chair With Backrest

Yuyao Huirui Leisure Products Co., Ltd manufactures the Bar Height Folding Chair With Backrest manufacturer alongside our wider outdoor folding furniture range in Yuyao City, Zhejiang Province, China. The chair is built for high tables, bar counters and standing-height service points, and it folds down to a compact envelope when the seating is not required. Our production scope covers the moulded seat and backrest, the folding frame and hinge assembly, and the OEM/ODM customization our customers specify.

A Folding Chair Dimensioned Around High-Table Seating

The design starting point is the relationship between seat height and the tabletop. This bar height folding chair is proportioned so a seated user keeps a comfortable working distance between thigh and table underside, which is what makes a high table usable for a full meal rather than a short drink. The backrest carries a defined tilt and curve, and the seat depth follows the natural sitting posture so load is spread across the seat instead of concentrating on the front edge.

The published open-size drawing for this model gives 112 × 45.5 cm. That figure anchors the floor footprint and the folded profile; where a venue needs a different stance, we adjust size and specification through OEM/ODM development rather than forcing a standard model into an unsuitable layout.

Where This Chair Belongs

• Bar and counter service — cafés, bars and restaurants that seat guests at raised counters.
• Hospitality terraces — hotel and resort outdoor areas where high seating pairs with bar-height tables.
• Event and activity venues — banquets, exhibitions and community halls that need extra high seating for short periods.
• Catering and rental fleets — operations that move furniture between venues and rely on fast set-up and take-down.
• Home and small-space use — apartments and balconies where a compact folded volume matters more than a permanent seating set.

Ergonomics: Seat Height, Backrest Tilt, Seat Depth

Comfort at bar height depends on three dimensions working together rather than on any single measurement. We treat them as one set when configuring the chair.

• Seat height is matched to the counter or bar-top level so legs sit at an appropriate distance from the tabletop.
• Backrest angle and curve are set to support the natural arch of the spine and reduce fatigue in prolonged sitting.
• Seat depth follows the seated posture so the user is supported without pressure behind the knees.

Folding Mechanism, Hinges and Locking Devices

The chair uses hinges with locking devices that hold it steady while in use and control it during folding. When the user unfolds the chair, the locking position is engaged and the frame stays set; when the venue closes, the same mechanism releases and the volume reduces substantially for storage or transport.

Specification Range and Configuration Options

The table below shows the specification areas we confirm with each order and how each one affects the delivered chair. Values marked as agreed are fixed from the approved sample or drawing before production starts.

Materials and Hardware Under One Production Scope

Huirui manufactures furniture, plastic products and hardware products, so the moulded panels and the folding hardware are produced as one controlled scope rather than assembled from unrelated sources. We work with eco-friendly materials selected for outdoor exposure and repeated folding cycles. Resin choice, panel thickness and hardware finish are agreed during configuration so the chair meets the duty level of the venue: a rental fleet that folds hundreds of chairs every weekend is not the same duty as a fixed café counter.

Quality Control Through the Production Run

Our QC operation system covers raw materials, warehousing, production, inspection, packaging and shipment. A professional operator team works on a digital control production line inside a fully enclosed workshop, which supports standardisation and consistency between batches, while automatic inspection machines and measuring instruments are used to check the manufactured product.

Set-Up, Storage and Maintenance

Chairs of this type need no site assembly: they are unfolded, the locking device is engaged and the chair is ready to use. That keeps commissioning time short on event sites where seating is installed and removed in the same day.

• Daily routine — wipe panels with a damp cloth; no special chemicals required for outdoor plastic surfaces.
• Periodic check — inspect hinge and locking hardware for looseness or deformation, especially in rental use.
• Storage — fold flat and store in a dry, covered area to protect the hardware finish.
• Spare parts — hardware replacements are supplied against the original order specification.

Pairing the Chair With Our Folding Tables and Stools

Bar-height seating is usually part of a mixed furniture order. Our Outdoor Plastic Folding Chair range covers standard-height and high seating, and the White Circular Folding High Stool serves standing-height counters where a backrest is not wanted. For terrace and event layouts, the 240cm Square Plastic Folding Table and our other folding tables can be combined with these chairs in a single shipment and a single packing plan.

Information We Use to Configure Your Solution

A workable bar height folding chair proposal is prepared from the working conditions, not from a catalogue number alone. We prepare the configuration and quotation once the following points are clear:

1. Venue type and application — counter service, terrace, banquet, rental fleet or home use.
2. Counter or bar-top height and the seating density required per linear metre.
3. Order quantity, expected repeat orders and whether a sample is required first.
4. Material, panel thickness and hardware finish preferences.
5. Colour, logo or label placement for own-brand supply.
6. Packing format, carton marking and container or load constraints.
7. Documentation required with the shipment and the delivery window you are working to.

Where a standard model does not fit the venue, we develop the chair as an OEM/ODM project: size, material and specification are set with the customer, from a small customized run to larger series production.

Frequently Asked Questions

What is the open size of this bar height folding chair with backrest?

The open-size drawing for this model is 112 × 45.5 cm. Other seat heights and panel dimensions are developed through OEM/ODM work when a venue or brand requires a different stance.

How does the chair stay stable at bar height?

Hinges with locking devices hold the frame in its open position, preventing wobble during use, and control the chair while it is folded for storage or transport.

Can the chair be produced under our own brand?

Yes. Huirui provides OEM and ODM services, and we customize specifications, sizes and materials to the requirements of each customer, including logo and label application agreed from an approved sample.

How is quality controlled before shipment?

Raw materials, warehousing, production, inspection, packaging and shipment are all covered by our QC operation system. Panels and hardware are checked during production, folding and locking function is tested, and packing and carton marking are verified before loading.

Can we order chairs together with folding tables?

Mixed orders are normal. High seating, standard folding chairs, stools and folding tables can be combined in one order and one loading plan so a terrace or event fit-out arrives as a single, matched delivery.

What do you need from us to prepare a quotation?

Counter height, quantity, venue type, material and colour preference, packing requirements and your delivery window. With those points confirmed, we prepare the configuration, the order specification and the quotation for the chair as delivered.