86cm Waterproof Plastic Camping Table

Yuyao Huirui Leisure Products Co., Ltd is an 86cm Waterproof Plastic Camping Table manufacturer based in Yuyao, Zhejiang Province, China. We mould the tabletop and the folding leg assemblies for this format ourselves and supply it for camping, outdoor dining, balcony use, event seating and commercial terrace service, where a compact square top and fast pack-down matter more than decorative trim. The same platform runs alongside our wider Outdoor Plastic Folding Table range, so one project can cover several table formats, colours and packing specifications.

Where the 86cm Format Fits in Service

Eighty-six centimetres is a seating-scale square, not a banquet size. It holds food, drinks and shared tableware for a small group, and it gives event or catering operators extra cover turns without consuming floor space. Because the top is square, units arrange singly, in straight rows or in clusters against a wall, which is useful where layouts change between functions.

• Camping and caravan trips — folds flat for a car boot, roof box or trailer shelf.
• Outdoor, garden and balcony dining — compact top for two to four settings.
• Event and catering overflow — square edges allow dense but orderly seating plans.
• Food-service terraces and canteens — wipe-clean surface between cover turns.
• Rental and hire fleets — quick set-up, predictable folding sequence, low handling effort.

Material, Waterproof Surface and Cleaning Behaviour

The top is produced from high-strength plastic chosen for outdoor duty, with eco-friendly material options forming part of our standard material policy. After moulding, the surface receives a treatment that limits liquid penetration and dirt adhesion, so spilled drinks, oil and food residue stay on the surface instead of soaking in and a damp cloth handles most cleaning routines at the end of a service day.

Material and finish remain configurable between orders. We confirm the plastic grade, colourway and surface treatment against your usage conditions before production, so repeat batches of the same 86 cm moulding stay consistent in feel, colour and cleaning response.

Specifications That Define the Working Envelope

These are the parameters we lock before a production run. Anything left open in the enquiry is confirmed in the sample or drawing approval stage rather than assumed on the line.

Configuration Options We Produce

• Size and format: the 86 cm square is one point in a family that runs from compact 80 cm round tables to 152 cm, 180 cm and 240 cm square or rectangular folding formats.
• Material grade: selected against usage conditions, loading pattern and expected handling in hire or commercial service.
• Surface treatment: waterproof finish and colour matched to the tabletop and folded leg frame.
• Branding: customer artwork applied through OEM/ODM labelling, packed to your instructions.
• Packing scope: carton specification, unit quantities and container loading plan confirmed per order.

Our Outdoor Plastic Folding Table Range

The 86 cm waterproof camping table sits inside a moulded folding table programme we build and finish in-house. Larger formats carry banquet and self-service duty; the 86 cm unit covers camping, domestic and small-footprint commercial work. Chairs and stools from our own moulding lines are supplied alongside, so table-and-seat sets can be ordered together.

Production, Quality Control and Batch Consistency

Our tabletop mouldings run on automated injection moulding machines, with CNC equipment shaping mating components and leg hardware. A fully enclosed workshop holds temperature and humidity within stable ranges for plastic moulding, which reduces warping and cracking risk across long production runs.

Digital control on the line sets and records machine parameters such as moulding pressure, curing time and temperature, so the first unit and the last unit of an order follow the same settings. Inspection covers raw material intake, warehousing, in-process production, final inspection, packaging and shipment release, using automatic inspection machines and measuring instruments.

• Pre-production material check against the approved grade and colour.
• In-process checks on top flatness, edge finish and leg pivot fit.
• Final inspection before packing, with the inspection scope agreed at order confirmation.
• Sealed, labelled cartons released only after packing verification.

Set-Up, Use and Maintenance

The table arrives assembled and folds open by hand; no tools are needed for normal set-up. Operators fold the leg frame fully open until it locks, then place the unit on level ground. On soft campsite soil or uneven terrace paving, small adjustable feet or a flat pad under the legs keep the top stable.

• Wipe the waterproof top with a damp cloth; avoid abrasive pads that dull the surface treatment.
• Fold the legs before lifting the table to prevent twisting the pivot hardware.
• Store folded and dry; the flat profile fits racking, vans and storage rooms without stacking stress on the top.
• Service attention focuses on leg and pivot hardware, which can be exchanged without disturbing the moulded tabletop.

Information We Use to Configure Your Solution

A quotation and configuration for the 86 cm table is prepared from the working point and the delivery requirement, not from a single size number. Our service team works from the same specification fields used across our folding furniture projects.

• Table format, open size and required quantity per delivery.
• Material preference, colour, surface treatment and target usage conditions.
• Tolerance, hardness and roughness expectations where these affect mating parts or feel.
• Branding artwork, labelling and carton marking requirements.
• Packing scope, container or pallet loading preference and shipping schedule.
• Sample and drawing approval route, plus the inspection scope you want recorded before shipment.

Our Outdoor Plastic Folding Chair line is moulded on the same site, which keeps table-and-seat colour and finish consistent when a project specifies both.

Frequently Asked Questions

Is the 86 cm tabletop fully waterproof?

The tabletop is made of high-strength plastic and receives a special surface treatment that resists liquid penetration and dirt adhesion. Drinks, oil and food residue stay on the surface for wipe-down cleaning; the treatment is designed to extend service life in outdoor use rather than to seal the table as a water container.

What is the open size and how compact is it when folded?

The drawing specifies an open size of 86 × 74 cm. The folding leg design brings the unit down to a flat, low-volume package that fits car boots, vans and storage rooms, and that reduces packed shipping volume for container orders.

Can you produce this table in our own colour and with our branding?

Yes. We operate OEM and ODM programmes across our folding furniture range, covering size, material, colour, surface treatment, logo and carton marking. Send the artwork and the usage conditions, and we confirm the manufacturable specification before production.

How do you keep repeat orders consistent?

Moulding parameters are set and monitored by the digital control production line, so pressure, curing time and temperature follow recorded values run to run. Raw material intake, in-process checks and final inspection before packing are controlled as one sequence, which keeps colour, surface feel and leg fit stable between batches.

What do you need from us to prepare a quotation?

Give us the quantity per delivery, target use and colour, plus branding and packing requirements and the shipping schedule. Where a project pairs tables with seating, tell us the seating plan and we will match the 86 cm square table with suitable folding chairs from the same production site.